background image

AIPHONE CO., LTD., NAGOYA, JAPAN

AIPHONE CORPORATION, BELLEVUE, WA, USA

AIPHONE S.A.S., LISSES-EVRY, FRANCE

http://www.aiphone.net/

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for 
a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it 
become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto 
itself the sole right to make the 

fi

 nal decision whether there is a defect in materials and/or workmanship; and whether or 

not the product is within the warranty. This warranty shall not apply to any Aiphone product which has been subject to 
misuse, neglect, accident, power surge, or to use in violation of instructions furnished, nor extended to units which have 
been repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries 
used in connection with the unit. This warranty covers bench repairs only, and any repairs must be made at the shop 
or place designated in writing by Aiphone. This warranty is limited to the standard speci

fi

 cations listed in the operation 

manual. This warranty does not cover any supplementary function of a third party product that is added by users or 
suppliers. Please note that any damage or other issues caused by failure of function or interconnection with Aiphone 
products is also not covered by this warranty. Aiphone will not be responsible for any costs incurred involving on site 
service calls. Aiphone will not provide compensation for any loss or damage incurred by the breakdown or malfunction of 
its products during use, or for any consequent inconvenience or losses that may result.

The object area of 

 is the EU.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

Reorient or relocate the receiving antenna

• 

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Increase the separation 

• 

between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.

• 

Printed in Thailand

Содержание JM-4MED





















Отзывы: