Aiphone IXW-MA Скачать руководство пользователя страница 2

- 1 -

Literature information

The important information concerning correct operation and what you should observe is marked with the following 
symbols.

Precautions

This symbol means that operating the device incorrectly or ignoring these precautions may 
cause severe injury or death.

This symbol means that operating the device incorrectly or ignoring these precautions may 
cause severe injury or property damage.

This symbol is intended to alert the user to prohibited actions.

This symbol is intended to alert the user to important instructions.

Warning

Negligence could result in death or serious injury.

Do not disassemble or modify the device.

May cause fire or electrical shock.

Do not, under any circumstances, open up 
the device.

Voltage within some internal components may 

cause electrical shock.

The device is not designed to explosion-proof 
specifications. Do not install or use in an 
oxygen room or other such locations filled 

with volatile gases.

May cause fire or explosion.

Caution

Negligence could result in injury to people or damage to property.

Do not install or connect the device with the 
power on.

May cause electrical shock or malfunction.

Do not turn on power without first checking 
to make sure the wiring is correct and there 
are no improperly terminated wires.

May cause fire or electrical shock.

Install the device in a position where it will not 
easily be brushed against by somebody's 
shoulder, etc.

Failure to do so could result in injury.

General Precautions

• Install low-voltage lines at least 30cm (11") away from high-voltage lines (AC100V, 200V), especially inverter air conditioner 

wiring. Failure to do so may result in interference or malfunction.

• Do not install the device in an attic or in a floor. Doing so would prevent maintenance inspections and repairs from being 

carried out. It may also cause malfunction.

Warning

Caution

Содержание IXW-MA













Отзывы: