Pg. 2
IS-SS-RA-R Instr.
0413JD
Aiphone Corporation
1700 130th AVE NE * Bellevue, WA 98005
Ph: (800) 692-0200 * Fax: (425) 455-0071
WIRING DIAGRAM:
IS-SS-RA-R
IS-CCU
IS-MV
IS-PU-UL
N/O Dry Contact
24V AC/DC 500mA
CAT-5e
CAT-5e
NO
COM
NC
FCC WARNING:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
•
For proper regulatory compliance, the drain wire should be disconnected at the power
supply end of the cable.
•
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: [email protected]
SPECIFICATIONS:
Terminations:
RJ45 jack for audio
Screw terminals for door release and relay outputs
Relay rating:
24V AC/DC 500mA on Door station, 24V AC/DC 1.0A on relay board
Operating Temp:
14° ~ 140°F / -10° ~ 60°C
Wiring Distance:
980’ with Cat-5e/6 cable
Dimensions:
11-3/4” H x 7” W
w/SBX-ISDVFRA:
11-11/16” H x 7-1/16” W x 2-13/16” D (top), 1-13/16” D (bottom)
OFF ON
NO
NO
C
NC
C
NC
1234
OFF ON
NO
NO
C
NC
C
NC
1234
Board on back of unit
See wiring below
RELAY BOARD WIRING AND SETTINGS:
Relay 1 Output
N/O, COM, N/C
Relay 2 Output
N/O, COM, N/C
**Relay 2 External Reset
Connect to N/O dry switch
Configuration Switch
See Settings to right
ON
1
2
3
4
Default Configuration when shipped
Optional Configuration
Normal Call
Emergency Call
Talking
Door Release
Trigger Source
RY1 Triggered?
RY1 Remains ON
During Talking?
RY2 Triggered?
RY2 Remains ON
During Talking?
RY2 Requires
Reset?
YES
NO
N/A
YES
YES
YES
YES
YES
NO
NO
NO
NO
N/A
N/A
N/A
N/A
N/A
N/A
YES
YES
ON
1
2
3
4
Contact Technical Support if additional switch configurations
are required.
Relay 1 triggers on normal call, emergency call, and communication. Relay 1 remains on during communication.
Relay 2 triggers on emergency call and remains on during communication.
Relay 1 triggers on normal call, emergency call, and communication. Relay 1 remains on during communication.
Relay 2 triggers on an emergency call and remains on during communication. Relay 2 requires reset.
Normal Call
Emergency Call
Talking
Door Release
Trigger Source
RY1 Triggered?
RY1 Remains ON
During Talking?
RY2 Triggered?
RY2 Remains ON
During Talking?
RY2 Requires
Reset?
YES
NO
N/A
YES
NO
N/A
N/A
N/A
YES
YES
YES
YES
YES
YES
N/A
N/A
N/A
NO
NO
YES
**
* IS-SS-RA-R can connect to any
control unit (IS-CCU, IS-SCU, IS-RCU)
Station must be programmed as an
audio only station.
*
2-pin connector
