17
GETTING STARTED
APPENDIX
USING THE PC MASTER STATION
Transferring to another (PC) master station
You can transfer a call received from a sub station to another
(PC) master station while communicating with it (communication
transferring), as well as setting calls to be automatically
transferred in the Setting window.
For a call from another (PC) master station, you can transfer
*
it only when you are communicating with it. (However, you
cannot transfer the communication to a remote site.)
■
Communication transferring
Receive a call and communicate with it. (
→
P. 12)
1
Click
2
.
Click
3
to select the (PC) master station (in your
site) to which you want to transfer the call (so that it
is highlighted) from the list.
To cancel the transferring operation, click
*
again.
Click
4
or
.
A communication between you and the transfer target
station begins.
While transferring, a sound rings at the source station to
*
indicate a transfer.
Click
5
to enable the communication between the
station that called you and the transfer target station.
■
Call transferring
You can transfer a call to the designated (PC) master station
(in your site or a remote site) or the telephone registered to the
system automatically (without answering it) by the [Transfer]
setting in the Setting window.
This function is useful when you are absent or you cannot
*
receive and answer a call.
*
lights up when the [Transfer] setting is set to "ON".
When transferring to a remote site, a (PC) master station in
*
the site should have been registered as the pilot station of
the site.
A call from a sub station (except IS-IPDV and IS-IPDVF) can
*
be transferred to telephone. (North America only)
The following settings can be made in the Setting window.
(Refer to the SETTING MANUAL for details.)
[Call transfer]
1
Transferring a call to the designated (PC) master station or
remote site automatically ([Transfer], [Transfer destination])
2
Setting the delay time of triggering transferring after a call is
received ([Transfer delay])
[Schedule transfer]
3
Setting a schedule for call transferring in the System
setting on the IP host unit ([Schedule transfer], [Scheduled
destination])
[Telephone transfer] (North America only)
4
Transferring a call to telephone automatically (when
[Telephone transfer] is set to ON)
[Schedule tel transfer] (North America only)
5
Transferring a call to telephone automatically in the period of
time on the day of the week set in the System setting on the
IP host unit (when [Schedule tel transfer] is set to ON)
* When both
1
and
3
are set,
3
takes priority.
NOTES:
You can also make a transfer setting for calls at when you are
•
absent. Make the setting in the Setting window. (
→
“SETTING
MANUAL”)
A call from a remote site can be transferred to a (PC) master
•
station in your site, but not to another remote site.
A call can be transferred to a remote site, but not to two or more
•
remote sites.
You cannot transfer a call to the source site of the call.
•
You may not be able to transfer a call to the target site depending
•
on the settings or usage of stations in the site.
e.g.)
An automatic call transferring setting to a site is disabled if the
pilot sub station in the site is set to call a remote site. The setting
of calling a remote site takes priority on the station.
