Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: [email protected]
GT-HID Instr.
0912PHJD
SPECIFICATIONS:
Model #:
HID 6005B
Power Source:
5.0 – 16.0 VDC
Absolute Max. Voltage:
18 VDC
Peak Current:
80 mA
Avg. Current 5V or 12V:
20 mA
Terminations:
Color-coded pre-wired pigtails
Wiring Distance:
500'
Dimensions (H x W x D):
3 ¾” x 4 3/16" x 1 7/8"
Operating Temperature:
-10° ~ 60° C / 14° ~ 140° F
TESTING AND OPERATION:
When power is applied to the reader, the LED will flash green three (3) times while the
beeper beeps simultaneously. The LED will then turn red. This indicates that the
microcontroller is operating properly.
Present an ID card to the reader. (Hold card directly in front of reader module.) The LED
will momentarily turn green while the beeper beeps once, indicating that the card was
read successfully.
TYPICAL LAYOUTS:
FCC WARNING:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
For proper regulatory compliance, the drain wire should be disconnected at the
power supply end of the cable.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The Reader is intended to be powered from a limited power source output of a
previously certified power supply.
Audio with 4 buttons
and card reader
Video with 4 buttons and
card reader
Digital audio with card reader
Digital video with card
reader
1
2
3
4
5
6
7
8
9
0
*
#
1
2
3
4
5
6
7
8
9
0
*
#
