- 9 -
Lift Control 1
[1] GHW-LC ID
[2] Select "ON" or "OFF" for the GHW-LC connection.
[3] Select "N.O." or "N.C." for the Output Type.
[4] Set the Timer. The time setting range is "1 to 600" sec. (one
second increments)
• Clicking the upper spin button will increase the time setting, and
clicking the lower spin button will decrease the time setting. At
this time, a numerical value exceeding either the upper or lower
value limits cannot be set.
• The number of seconds can be input directly by clicking inside
of the Timer box.
• Input can be set by pressing the Enter key or by clicking inside
of another Timer box.
[5] After GH system settings are completed, the connected GHW-
LC ID numbers will display in black if the "Check" button is
clicked while connected to GH-BCX/A.
The system will be in use when Connecting status is being
checked. Checking connections is not possible while the
system is in use.
Lift Control 2
[1] The resident information that has been entered will be
displayed.
[2] Set which relay will activate in the corresponding GHW-LC
for each residence. The setting range is "1 to 20".
Data transfer
1. Select "Export" in the "Connection" menu.
2. If "OK" is selected, the data will be transferred to GH-BCX/A.
[1]
[2]
[3]
[4]
6-2
[5]
[1]
[2]
6-3
6-4
1
2
