background image

13

5. Frequently Asked Questions (FAQ)

Q: What are the light indicators when the machine is running?

1. Steady blue light indicates the normal startup;

2. The blue indicator flashing slowly during operation means the system 

     runs normally;

3. The blue light flashing quickly means low battery, please recharge the 

    cleaner.

Q: No response after turning on the robot

A:

A:

Q: The blue light flashes after the machine is turned on, and the blue light 

     flashes slowly after the water is launched, but the machine does not run

A:

1. Check if the battery is fully charged before use.

2. If you can't turn on the machine even after plugging in the charger or 

    fully charged, please contact the customer service to replace the driver 

    kit or the machine.

1. When it stops, check if there are other objects stuck the machine;

2. If not, please contact the customer service to replace the driver kit or 

    the machine.

Q: The light indicator in the charger is abnormal and flashes other colors

A: 1. Please note that the charger indicator light has two colors, red means 

    charging, and green means fully charged. 

2. When the charger is not plugged into the product after the power is on, 

    the light will be green.

3. When the charger is powered off, and the charging port is not 

    unplugged from the machine, the light will be green.

4. The machine itself will not have any light indication when charging

Q: The robot becomes slower in operation and its suction becomes smaller

A:

1. Please clean the filter and check if the swimming pool is too dirty. 

2. If so, it is recommended to clean it manually first, and then use the 

    product for daily maintenance.

Содержание Seagull 1000





















Отзывы: