Aiper Orca 800 Mate, Руководство пользователя

Страница: 5 / 16

1
Important Precautions
1. Read the manual carefully, and use the cleaner according to the manual.
We are not liable for any losses or injuries caused by improper use.
2. To avoid any accidents/damages, please fix the power supply unit 11.5ft
(3.5m) away from the swimming pool by using the included safety rope,
in case it falls into the water and result in potential danger.
3. To prevent severe damages to the cleaner, never power on the unit when
it is outside of the swimming pool.
4. The power cord must be connected to an appropriate earthed socket
and the power connector must be plugged in tightly.
5. Hold the top handle when putting the cleaner into water or lifting out
of the water, do not pull the cable. Before powering on, make sure to
empty the trapped air inside the cleaner (no more air bubbles come
from the cleaner and the cleaner is fully submersed on the pool floor).
6. Before powering on, make sure the filter tray is assembled in position
and the cord is fully released to avoid any winding, which could affect
the cleaner's performance or cause damages.
7. Please clean and wash the filter tray every time after use.
8. The cleaner should be stored in a cool and ventilated place, away from
direct sunlight when it's not in use.
9. The power supply unit should be placed at a shaded area during working.
To avoid overheating and potential damages of components, never cover
the power supply unit during working.
10. Only authorized after-sales service personnels can open the cleaner's
power supply unit and motor assembly, otherwise the warranty will
be invalidated.
11. Do not use the cleaner beyond the working environment/conditions
stated in this manual.
12. Make sure the PH value of the pool water is between 7.0~7.4.
13. This machine is to clean the pool only not for other purposes.
14. Do not use the cleaner immediately after spraying the pool chemicals
and do not use the cleaner as a dosing machine, which will damage
and corrode the parts.