AiP AOC-162, Руководство пользователя

Страница: 22 / 30

AOC-162 User's Manual (OM120000036A)
3.1.2
Attachment of a case / removal
・
Removal of the cover of a case
a) Before removing this product, be sure to turn OFF the power supply of a system.
It causes breakdown.
*This product should be careful to be high temperature immediately after the power supply OFF.
b) Remove six M2 screws (red arrow) of Figure 3-1-2_1.
Remove by suitable power.
c) Since only the cover of a case separates, change a jumper setup.
d) Attach six M2 screws (red arrow) to become as before.
*Open a cover, only when you carry out PoCL setup.
・
Attachment of a case
a) Place this product on metal with heat conduction as sufficient as possible.
b) The mount has a hole that through four M3 screws (blue arrow) .
Let four M3 screws (blue arrow) in this hole and perform screw fixation.
Refer to Figure 3-1-2_2 for a mount size.
c) After confirming the installation of the product, turn on the power of the system and check the
operation.
Figure 3-1-2_1 Attachment of a case / removal
- 16 -