AiP ABL-005IR, Руководство пользователя

Страница: 27 / 72

SWIR Line Camera Series User’s Manual
(OM150000013H-EN)
－ 27 －
4-11
Acquisition Control
Acquisition Control is the function to perform exposure synchronizing with GPI/GPO signal. The camera trigger control and
GPIO can be configured with flexibility.
NOTE
If you want to change the camera’s settings it is necessary to stop AcquisitionControl and send the command.
Refer to 4-11-2 section how to stop AcquisitionStop.
4-11-1
Acquisition Start
This command starts the acquisition and output the image according to the trigger setting.
command param1
CL
acquisitionstart
start
N/A
GV AcquisitionStart N/A
4-11-2
Acquisition Stop
This command stops the acquisition. If the command is executed during the image output, the acquisition stops after the
output of the frame is completed. If the camera is waiting the trigger, the acquisition is forced to stop.
command param1
CL
acquisitionstop
stop
N/A
GV AcquisitionStop N/A
4-11-3 Acquisition Mode
NOTE
This function is available with ABL-010IR only.
Three different types of Acquisition Mode are provided. In case of running in single frame or multi frames, the acquisition
is automatically stopped after output frame as programmed.
command param1 Description
CL
acquisitionmode
mode
0 Capture 1 frame only ※ 1
1
Capture frames until reaching
programmed number
2 Capture image continuously
GV AcquisitionMode
SingleFrame Capture 1 frame only ※ 1
MultiFrame
Capture frames until reaching
programmed number
Continuous Capture image continuously
※
1 1 frame capture is available only on
「
Snap
」
.
4-11-4 Acquisition Reset
All parameters in the acquisition control are able to be reset to the factory default setting.
command param1
CL
acquisition-reset
acreset
―
GV AcquisitionPreset Default