aion Parhelion, Руководство пользователя

Страница: 7 / 10

PARHELION VINTAGE OVERDRIVE 7
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it’s recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or “Actual Size”. You can double-check this by measuring
the scale on the printed page.
Top jack layout
assumes the use of closed-frame jacks like the Switchcraft 111X . If you’d rather use
open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.
LED hole drill size assumes the use of a 5mm LED bezel , available from several parts suppliers. Adjust
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
0 1 2
CM
0 1
INCH
x: -0.65, y: +1.71 x: 0.65, y: +1.71
ø9/32” ø9/32”
x: -0.65, y: +0.41
ø1/4”
x: 0.65, y: +0.41
ø1/4”
x: 0, y: -1.20
ø15/32”
x: -0.775, y: -1.20
ø5/16”
CENTER (0,0)
125B
ø3/8”
ø1/2”
0.385”
0.625” 0.625”
ø3/8”
OUT
DC
IN
VOLUME DRIVE
EQ CLIP
FOOTSWITCH LED