Programming and Navigation 6
AHCTS Series User’s Guide
PROGRAMMING & NAVIGATION
The Auditor product line has been designed to provide a consistent interface. the user
interface menu is “driven”, as opposed to 'hard coded' providing several advantages:
•
Allows user to operate any of our products with the shortest learning curve
possible.
•
Offers greater functionality than previously possible.
•
User can economically upgrade and/or customize the tester in the future.
The four buttons on the bottom row are programmable or "Soft Buttons". The functionality
of the buttons will vary with the current selection. There are two ways to change settings,
or otherwise gain access to the operation of the tester:
1. Live Programming: Where the "soft" buttons have text above them, pressing the
button will scroll through the options. In the picture above, pressing the down arrow
scrolls through the Torque Modes. These include Peak, 1
st
Peak and Track. The Up
Arrow scrolls through the Engineering Units.
2. Menu Driven: There are two sets of menus in the display.
a. Bottom right oval button scrolls through the Tester Operating Functions. For
basic testers, this includes the RUN MODE and MEMORY (MEM) MODE.
Toggling this button changes the functions of the other soft buttons appropriately.
ENTERS THE MENU
SYSTEM
SCROLLS THROUGH
TORQUE MODES
