15
ECU Bridge CAN/RS232 version has 5 pins Binder 712 connector for connection with SmartyCam only
and its needs SmartyCam CAN cable (2 meters
V02566070
, 4 meters
V02566060
). Other connections
are made using the free wires: 5 wires for ECU connections and 2 wires for power as shown in the table
below.
The device connects to the PC using the 3 pins Binder female connector you find on top of ECU Bridge.
5 pins Binder 712 female connector
Solder termination view
Pin Function
1 CAN+
2 GND
3 +Vb
4 CAN-
5 +Vb
Ext.
Free wires
Cable colour
Function (label)
Free wires are labelled and ECU Bridge
features a 120 Ohm resistor between
CAN+ and CAN-
White RS232RX
Black GND
Blu RS232TX
White
CAN High (CAN+)
Blu
CAN Low (CAN-)
Black GND
Red +Vbext
ECU Bridge technical characteristics are
:
•
Configurable ECU interface
•
CAN protocol for external modules (displays or SmartyCam)
•
USB port for programming via PC
•
External power: 8/18V
