Aim PDM 32, Руководство пользователя

Страница: 46 / 63

www.aim-sportline.com - PDM 32 User Guide 45
Use for predictive time . Click the icon ( ) for setting the parameters:
In this case the LEDs colours are fixed in:
Green, if the lap time is improving
RED, if the lap time is worse than in the reference lap.
You can define the threshold at which one LED is turned ON.
Assuming you fill in “0.10 sec” and your lap time is improving of 0.30 sec toward the reference lap, your MXS 1 .2 Strada
will switch on 3 LEDs green; if, on the contrary, your lap time is worsening the LEDs will switch on red.
Please note : this option only works if an optional GPS Module is connected.
17.2 Alarm LEDs configuration
To set the new alarm:
•
Define the Alarm name ( 1 )
•
You may use a combination of conditions for setting an Alarm and choose if the conditions are to be ALL valid, or just
one of them.
•
decide which action is to be trigged ( 5 ) among displaying a message or a timed popup message, display a measure,
switch a LED on or activate an output signal (CAN output page, see the related paragraph)
• decide the alarm ending condition (“Untill” – 6 ) among: condition no longer met, the device is turned off, a button is
pushed, or data are downloaded
•
“+” buttons you find right of the panel are to add new alarms (the top one) or to add new actions to an alarm
(bottom one)