LCU-ONE Analog
User Manual
Release 1.02
2
Chapter 3 – Configuration
To work properly
LCU-ONE Analog
needs to be configured. The configuration can be
made both using
Race Studio 2
and using
Lambda Configurator
the free software -
included in the kit - properly designed and developed by AIM to configure this device.
5
3.1 – LCU-ONE Analog standard configuration
Configuration through
Race Studio 2
(standard) is possible only if calibration curve
default points – 1.95
=
0.65 and 4.8
=
1.6 – have not been modified.
To configure LCU-ONE Analog with
Race Studio Configuration
follow this procedure:
•
run the software;
•
press “AIM system manager” button on the left vertical keyboard;
•
select the logger LCU-ONE Analog is connected to
•
activate “Channels” layer
•
select the analogue channel to set the probe on
•
double click on “Sensor type” column corresponding to that channel and
select “AIM Lambda LCU-ONE 1.65 – 1.6 Lambda)” option as shown here
below; click out of the cell to confirm the choice.
www.aim-sportline.com
4