O P T I O N M O D U L E S A N D R E S E R V E B A T T E R Y
5
2
OPTION MODULES AND RESERVE BATTERY
2.1
Option module types
The following option cards can be used with the E700:
•
E7O1 (RS232 serial card)
•
E7O2 (RS485 serial card)
•
E7O3 (I/O-card)
•
E7O4 (RS- and I/O-card), supported from meter version 2.0
•
E7O5 (CS- and I/O-card), supported from meter version 2.0
•
E7O6 (I/O- and modem card), supported from meter version
3.0
•
E7O7 (modem card), supported from meter version 3.0
(requires E700UI v6.0)
•
E7O8 (I/O card), supported from meter version 1.0
(requires E700UI v6.0)
The meter can use simultaneously a maximum of two option cards.
The E7O4- and E7O5-cards are both serial- and I/O-cards. The
E7O6 is a combined I/O and modem card. These three cards take
both option card slots. Therefore, it is not possible to use another
option card simultaneously with these cards.
Note!
Option card E7O7 has to be placed in the rightward card slot (slot
B). It is not functional in the other card slot.
2.2
Changing the option modules
If requested, the option cards are installed to the meter by Enermet.
If you want to add or change the option cards, do the following:
1.
Switch off the voltage.
2.
Remove the terminal block cover.
©
Enermet Oy
E700
Manual for Installation and Use v. 6.31
ACTIVE INFORMATION MANAGEMENT
