3 |
USER INSTRUCTIONS
OPERATING INSTRUCTIONS
BOOT:
1. After unpacking and accessing (output is QC3.0 quick charge
DC 5V 3A, 9V 2A, 12V 1.5a) adapter, long press the power button to
enter the startup program. At this point, the LED on the front display
interface is all lit for 5 seconds for self-check, so as to ensure the normal
use of the display screen. After normal display, the power indicator lights
up.
CLOCK SETTINGS:
1. Press the power button to enter the clock setting program when the LED
self-check on the display screen displays 00:00 (the default clock of the
machine is 24H). At this point, the number of hours (00:) flicker, through
the “+” or “-” key set to the correct number of hours (00: -23:), then
short press M key to switch to the minute setting area, at this time the
minute (00) flicker, through.
2. After setting the “+” or “-” key to the correct number of minutes
(: 00- : 59), press the M key to confirm or pause for 3 seconds, the
machine will automatically complete the default setting and return to the
home screen display interface.
ALARM SETTINGS:
1. After confirming that the clock time is displayed correctly, press M to
switch to the setting of alarm 1 (press M again to switch to the setting of
alarm 2). At this time, the logo of alarm clock 1 or alarm clock 2 lights
up and flashes. Press the power button to enter the setting program
(the same as alarm clock 1 and 2).
2. Timing alarm settings:
Hours (00) when flashing, debug to the
correct number of hours (00: -23) through the “+” or “-” key, then switch
to the minute setting area by pressing the M key. At this time, the minute
(00) flashes.
Please read this instruction manual carefully before using for
the first time and always keep these instructions.
