Aim AIM12S, Руководство пользователя

Страница: 7 / 12

7 |
CLEANING
1. Clean the inner liner, ice collecting tray, water box, ice shovel and
evaporator frequently. Unplug the unit and remove the ice cubes before
cleaning. Use a diluted solution of water and vinegar to clean the inside
and the outside surface of the unit. Do not spray the unit with chemicals
or diluted agents such as acids, fuel, or oil. Rinse thoroughly before
starting.
2. To ensure the cleanliness of the ice cubes, water in the water tank is
suggested to be replaced every 24 hours.
3. If the compressor stops for any reason, like water shortage, too much
Ice, power off, etc... Do not start the system right away, wait 3 minutes,
and then re-start.
4. Always use fresh water before starting ice production either at initial
installation or after a long shut-off period.
Remove this silicon plug and drain the water