7 |
ASSEMBLY INSTRUCTIONS - CONTINUED
PLACING
The heater should be at least 90 cm away from walls or other objects such
as furniture or curtains; ensure that the power supply corresponds to that on
the nameplate; the temperature controller switch and power switch are at
“OFF” position; plug in the attaching plug.
1. The temperature controller can regulate room temperature. Turn the
temperature controller clockwise to increase the temperature; turn it
anti-clockwise to reduce the temperature until appropriate temperature is
reached.
2. Power switch is rotary switch: the switch gears are shown in the
schematic diagram.
0
tap is the shutdown state.
I
With power switch
I
pressed, the indicator “ON” indicates
Level
I
power.
II
With power switch
II
pressed, the indicator “ON” indicates
Level
II
power.
III
With both power switch
I
and
II
pressed, the indicator “ON”
indicates Level
III
power.
IV
With both power switch
I
and
II
pressed, the indicator “ON”
indicates Level
III
power, PTC auxiliary heating at the same
time open.
V
With both power switch
I
and
II
closed, and only open the
PTC auxiliary heating.
