aiko DP709, Руководство пользователя

Страница: 12 / 23

System Setup
3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you
can adjust the dynamic value up to avoid losing sound details resulting from the low
volume.
4 VIDEO SETUP PAGE
4.1 VIDEO OUTPUT
OFF: Set video output to CVBS (via the composite output) or to S-Video if the S-Video
connection is made.
YUV: Set video output in analog component video format when the component video
outputs are used.
P_YUV: Set video output as progressive YUV signals if the component video outputs are
used.
NOTE: If the video setting differs from the physical video connection, the TV set may
have poor picture. You should press [V-MODE] on the remote control repeatedly to
switch to an appropriate video output mode.
4.2 SHARPNESS
There are three options ( HIGH , MEDIUM and LOW ) for you to choose in this item.
4.3 BRIGHTNESS and CONTRAST
Enter these items respectively, use direction key [ ]/[ ] to adjust the value, then press
[ENTER] to confirm it.
5 PREFERENCE PAGE
If there's no disc in the disc tray, the disc tray is open or the disc in the disc tray is
stopped, this item is available.
5.1 TV TYPE
This product supports both PAL (Phase Alternating Line) and NTSC (National Television
System Committee) television broadcasting standards.
PAL: If the connected TV is PAL system which is used in China, Hong Kong and Europe,
etc, select this mode. It will change the video signal of an NTSC disc and output in PAL
format.
MULTI: If the connected TV is multi system, select this mode. The output format video
signal of the disc will be in accordance with the video signal of the disc.
NTSC: If the connected TV is NTSC system which is used in Taiwan, America and
Canada, etc, select this mode. It will change the video signal of a PAL disc and output in
NTSC format.
NOTE : If a wrong selection is made, the viewing image will be very poor. In such case,
you need to change the option in this item to fix the error.
-11-