CONNECTORS
For the audio signal Use the XLR (male) connectors for the input, and XLR (female) connectors for the line output.
Cold “-”
Cold “-”
Shield (ground)
Hot “+”
Hot “ +”
Shield (ground)
Use NL2FC or NL4FC SPEAKON connectors for the Channel A,B output power signal.
NL2FC SPEAKON
NL4FC SPEAKON
Hot “+
Hot “+”
Cold “-”
Cold “-”
UNPACKING
The manufacturers quality control system provides for careful examination of each product before it leaves the factory to ensure its
flawless appearance. After unpacking, please, check the unit for any physical damage. In case of damage, please, contact our local
dealer. Keep the shipping carton and all packing material, as you may require them for re-shipment of the unit.
CAUTION!
The amplifier runs on 230VAC voltage. Removing the cover will expose you to a potentially dangerous voltage! Do not use the unit
if the electrical power cord is frayed or broken. Power is supplied from 230V AC single-phase grounded 50/60 Hz source!
CAUTION!
The amplifier can yield dangerous output voltage! Do not install an energized unit into the speaker system. Do not touch the non-
insulated cable parts connected to the unit in operation!
CAUTION!
The high sound pressure level of speaker systems generated by high output power delivered by the amplifier may be hazardous to
your hearing. Please, take adequate safety precautions.
Содержание SUB LP210A
Страница 4: ......
