GB
03
GB
04
Always ensure your blender is unplugged from the power outlet
before fitting or removing the blade assembly.
Always handle the blade assembly with caution, as the blades are
extremely sharp.
To assemble the blade system, operate as follows:
1. Place the silicone rubber seal over the blade assembly, as show
in Fig. 1.
2. Place the blade assembly into the base of blender jar.
3. Ensure that the blade assembly is firmly in the place by turning
it counter clockwise as indicated by the arrow. (as Fig.2).
Preparing for use:
1.Place the blender jar on the motor base and
rotate clockwise (as Fig.3).
2.Remove the lid or the lid stopper from the
blender jar, put the ingredients into the jar.
3.Place the lid with the lid stopper back onto
the jar. Do not exceed the maximum indicated
level 1.5 liters.
4.Place desired blending speed 1 or 2 or
PULSE. After you have completed blending,
turn the speed control knob to the “0”
position.
1. A brief whirl in the blender will rescue a lumpy gravy, or an
eggs-based sauce that has separated.
2. Food items for blending should be cut into cubes
(approximately 2-3cm), this will assist in achieving an even
result.
General Description
A: Lid stopper
B: Lid
C: jar (1.5 Liters)
D: Rubber ring
E: Removable Blade Assembly
F: Motor Base
G: Speed Control Knob
H: Rubber Feetz
Technical Data
Installation and Maintenance
Before Using Your Blender
Important:
Using your product
Handy Blending Hints
8433325502102
