Usage and Maintenance Instructions
Ver. 2 08/2012 (1711)
2
INTRODUCTION
Thank you for deciding to purchase the 2-in-1 Jar & Bottle Opener from Aidapt. The
Jar & Bottle Opener is manufactured from the finest materials and components
available. When used correctly it is designed to give many years of reliable trouble-
free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
A two in one Jar & Bottle Opener; enables the user to easily open jar lids and bottle
caps.
INSTRUCTIONS FOR USE
The Jar & Bottle Opener is simple to use:
•
To Open Jars:
Grip the Jar & Bottle Opener with the ergonomically-
designed handle and place the product over the jar lid. Position the Jar &
Bottle Opener so that it grips the jar lid and pull/push the handle to twist
the jar lid off the jar.
•
To Remove Bottle Caps:
Grip the Jar & Bottle Opener with the
ergonomically-designed handle and place the product over the jar lid.
Position the Jar & Bottle Opener so that the central hole and metal lip are
above/below the edge of the bottle tops. Pull the handle of the Jar & Bottle
Opener up to flip the cap off the bottle.
CLEANING
Clean your Jar & Bottle Opener using a non-abrasive cleaner or mild detergent with
a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may
damage the product beyond repair and should not be used. Always ensure that
you wipe dry the equipment after cleaning.
The Jar & Bottle Opener can also be cleaned on the top tray of a domestic
dishwasher on a standard/eco or cool program.
