Usage and Maintenance Instructions
Ver. 3 07/2012 (1863)
2
INTRODUCTION
Thank you for deciding to purchase the Jar & Bottle Holder from Aidapt. The Jar &
Bottle Holder is manufactured from the finest materials and components available.
When used correctly it is designed to give many years of reliable trouble-free
service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
The Jar & Bottle Holder enables the user to easily open jar lids with only one hand.
INSTRUCTIONS FOR USE
The Jar & Bottle Holder is simple to use:
•
Place the Jar & Bottle Holder with the lip hanging over the edge of the
worktop or table.
•
Pull back the T handle and place the jar or bottle in the ‘V’ section.
•
Push in the sliding section with the hip or stomach and twist to remove the
jar or bottle lid with your free hand.
CLEANING
Clean your Jar & Bottle Holder using a non-abrasive cleaner or mild detergent with
a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may
damage the product beyond repair and should not be used. Always ensure that
you wipe dry the equipment after cleaning.
The Jar & Bottle Holder can also be cleaned on the top tray of a domestic
dishwasher on a standard/eco or cool program.
