2
Usage and Maintenance Instructions
INTRODUCTION
Thank you for deciding to purchase the Key Safe from Aidapt.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments as this may damage
the item.
Check the product for any visible damage If you see any damage or suspect a fault, do not use your
product, but contact your supplier for support.
USAGE INSTRUCTIONS
To open the key safe:
1. Rotate dials to the correct combination (the default combination is set at the factory to 0-0-0-0)
2. Pull the door fully open and add or remove the keys
3. Close the door, rotate the dials at random to lock the safe.
4. To open set the combunation to 0-0-0-0.
To change the combination:
1. Open the Key Safe as normal. (See above)
2. Push the reset lever on the back of the door to the right and upwards (can be slightly stiff).
3. Rotate the dials to your desired new combination – ensure they are aligned correctly so that the code
is entered accurately.
4. Push the RESET lever downwards and to the left (back to its original position).
5. Close the Key Safe and rotate the dials at random.
TEST YOUR CODE BEFORE MOUNTING THE KEY SAFE
See the next page for how to mount the unit
PLEASE NOTE
THE CODE CANNOT BE RESET UNLESS THE SAFE IS OPENED.
THERE IS NO OVERRIDE. AS SUCH IF YOU FORGET YOUR CODE
THEN THE ONLY WAY TO OPEN THE SAFE IS TO GO THROUGH UP
TO 1000 COMBINATIONS TO FIND YOUR CODE.
