2. Adjusting Local Time (T1)
•
Press the ‘Time’ button for 3 seconds until the time starts blinking.
•
Press the ‘Hour’ button to adjust the hour
•
Press the ‘Minute’ button to adjust the minute
•
Press the ‘Snooze’ button to swap 12/24 hour clock, once selected it will automatically
revert to set time
•
Press the ‘Time’ button again to exit the time set mode
3. Adjusting Alternate Time (T2)
•
Press the ‘Time’ button to swap display to show the second time (T2)
•
Press and hold the ‘Time’ button for 3 seconds, or until the hour digits start blinking
•
Press the ‘Hour’ button to adjust the hour.
•
Please note: You cannot adjust the minute digits on T2, only the hour
•
Press the ‘Time’ button again to exit the time set mode
3. Swap between Local time (T1) and second time zone (T2)
•
Press the ‘Time’ button to toggle between the Local time (T1) and the second (T2). The
digital display will show T1 or T2. Please note the alarm will activate according to the
display time.
4. Set Alarm Time (AL1/AL2)
•
Press the ‘Alarm’ button to swap the display to show the alarm time AL1/AL2
•
Press and hold the ‘Alarm’ button for 3 seconds until the alarm time starts blinking AL1/
AL2
•
Press the ‘Hour’ button to adjust the hour of the alarm time
•
Press the ‘Minute’ button to adjust the minute of the alarm time
•
Press the ‘Time’ Button again to exit the time set mode
5. Display Alarm Time (AL1/AL2)
•
Press the ‘Alarm’ button to swap alarm digital display to show the alarm time AL1/AL2.
Press ‘Time’ button again to display desired time (T1/T2).
6. Back Light
•
Press the ‘Snooze/Stop’ button once to turn on the back light. Back light will stay on for
approximately 20 seconds
7. Test
•
Press and hold the ‘Test’ button to test the buzzer
8. Alarm on/off
•
Slide the alarm 1 or alarm 2
switch to on or off position to
turn the alarm on or off, see fig. 2
fig. 2
Alarm1
Vib
Alarm2
