aidapt VG840, Инструкции по ремонту и обслуживанию, Страница: 3 / 12

Fixing and Maintenance Instructions Ver. 2 07/2012 (1328)
3
ASSEMBLY INSTRUCTIONS
1. Clip bottom of bracket ‘D’ onto leg section ‘B’
2. Clip top of bracket ‘D’ into one of the recesses (to preferred angle) on the underside
of tabletop ‘A’
3. Fit leg section ‘B’ into leg section ‘C’. Adjust to required height and tighten.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.