Fixing and Maintenance Instructions
Ver. 5 10/2013 (1327)
4
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not use abrasive cleaners as this could damage the surface of the equipment. For
cleaning, wipe with a clean cloth soaked in detergent solution and wring out. Depending on
the detergent manufacturer’s instructions the solution may be heated.
Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the
detergent changed frequently. The detergent should be rinsed or wiped off using a clean
cloth immersed in clean water and wrung out.
To disinfect make sure the equipment has been cleaned and dried and then wipe over with a
clean cloth and a compatible liquid disinfectant. After disinfecting clean with clean water
and dry.
When using detergent or disinfectants then please refer to manufacturers’ instructions and if
unsure then consult your local Infection Control Specialist for advice.
The metal frame of this equipment can be cleaned/disinfected by moist heat at 80
o
C for a
minimum of 1 minute or autoclaved at 80
o
C for at least 1 minute. After cleaning or
disinfecting treat all joints with a water dispersing agent, e.g. WD40.
NB. The wooden table top is not suitable for cleaning with moist heat or autoclaving.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020
•
Fax: +44 (0) 1744 745 001
•
Web: www.aidapt.co.uk
Email: [email protected]
•
•
