2. HEIGHT ADJUSTMENT
Your trolley can be adjusted in height if required.
Re-insert all ‘E’ clips
facing the line of travel
also ensuring that the ‘E’ clips have passed
through the product frame and extension leg and are secure. See fig. 2 below
To adjust the height remove the
LOWER
‘E’ clips from the extension legs and pull each leg to the
desired height. See fig. 1 below
Check that the trolley is sitting evenly on the floor and there is no excessive rocking or the trolley is
tilting to one side. If this is the case, please do not use the trolley, but repeat the above steps to correct
the problem or contact your supplier for service support.
3. CLEANING
The polypropylene clip in trays can be removed for cleaning. To remove, place your finger and
thumb on the underside of the ‘U’ clip over inverted ‘U’ section, push upwards and remove.
The
t
rays can be cleaned with either a mild detergent or disinfectant, or alternatively pressure
washed or autoclaved at a temperature of up to 100˚C.
To refit the tray, simply push down on the inverted U’ sections ensuring that the tray is in line with the
trolley frame. Check that all the engaging edges are sitting neatly, evenly and securely to the frame.
AIDAPT BATHROOMS LTD. Lancots Lane, Sutton Oak, St. Helens WA9 3EX
Tel: 01744 745020 Fax: 01744 745002 E-mail: [email protected] Web: www.aidapt.co.uk
Never adjust the legs unevenly: this is dangerous and can seriously compromise the
safety of the user.
fig. 1
fig. 2
