aidapt VB503 Скачать руководство пользователя страница 4

Assembly and Operating Instructions 

Ver. 6 10/2020 (1262) 

CASTOR REPLACEMENT 

NB: We would recommend that castor replacement is done by Aidapt or a qualified technician. 

1.

 

Remove the existing castors 
using a short reach 8 mm Allen 
key (available from Aidapt). 

2.

 

Replacement M12x35 bolts are 
provided with each castor, the 
removed bolts should be 
disposed of. 

3.

 

Apply a thread locking fluid to 
the bolt to lock the assembly 
securely. We recommend the use 
of Bondloc B243 or Locktite 243. 

4.

 

Assembly should be screwed tightly and the castor should sit flush with the frame. 
(i.e. there should be no gap between the castor and the frame) 

NB: Where leg extension pins are in place it is recommended that the extension pins 
are replaced at the same time as the castor. 

For further technical details contact Aidapt.

 

COMMODE BUCKET 

To remove the commode bucket, simply slide the bucket out from the chrome runners at 
the rear of the commode. Cover the top of the bucket to avoid splashing, carefully dispose 
of the contents into a proper sluice or WC. Never use an open drain, sink or basin. This 
could cause a serious health risk. To avoid the possibility of trapping, do not slide the 
commode pan on or off the rails while somebody is sitting on the chair. 
Clean out the residue with a suitable disinfectant and refit to the commode after use 

NB. Always remove the commode bucket prior to removing the grey horseshoe seat.

 

CLEANING 

A useful guide to decontamination is MHRA leaflet DB2003(06). 

Do not use abrasive cleaners as this could damage the surface of the equipment. For 
cleaning, wipe with a clean cloth soaked in detergent solution and wring out. Depending 

on the detergent manufacturer’s instructions the solution may be heated.

 

Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and 
the detergent changed frequently. The detergent should be rinsed or wiped off using a 
clean cloth immersed in clean water and wrung out.   
To disinfect make sure the equipment has been cleaned and dried and then wipe over with 
a clean cloth and a compatible liquid disinfectant. After disinfecting clean with clean water 
and dry.  

Отзывы: