Assembly and Operating Instructions
Ver. 4 01/14 (2289)
6
BRAKE ADJUSTMENT
The brakes may need to be adjusted periodically. We would advise that this is done
by a competent person.
For normal adjustment see Fig. 7a, whereby ‘Nut A’ needs to be released and then
the adjustor needs to be turned clockwise/anticlockwise to adjust the brakes. After
adjustment re-tighten Nut A. Should further adjustment be needed then see Fig. 7c
where the hex nut needs to be undone and the cable pulled and tightened before
re-locking with the allen key.
Fig. 7c
Hex Nut
(insert allen key here)
Pull this cable
