Fixing and Maintenance Instructions
4
ASSEMBLY:
Some models of chairs are packaged in two pieces consisting of the back and the base to make transport
and delivery easier. Assemble the chair as per the assembly instructions below.
DIRECTIONS:
1) Remove seat (fig. 1) and back (fig. 2) from packing bags.
2) Hold back the upholstery flap with both hands and line up brackets.(fig. 3)
3) Apply downward pressure (fig.4) and ensure both sides snap into locked position. (fig. 5)
Note:
Both back receivers need to be lowered onto the flat bars at the same time and evenly to prevent
binding.
Note:
Do not assemble the chair if the upholstery or any of the parts of the chairs are damaged.
Check all parts carefully before assembling the chair. If any problem is apparent contact the vendor.
SPECIFICATIONS:
WEIGHT
- the weight of the chair is 62kgs (136lbs)
- the maximum weight capacity of the chair is 160kgs (352lbs)
Power Requirements – 100~240 V 50Hz 70W
Note motor operation: 2 minutes is available for continual use, allow 15 to 30 seconds between cycling
the motor.
CASTORS:
Your lift chair is supplied with two castors for easy movement of chair and transferring of the user. If
optional braked castors have been purchased ensure they are locked before using any of the positioning
functions to prevent movement and possible injury or damage.
CAUTION:
A sudden change in temperature from cold to warm can cause condensation on electrical
and mechanical parts. It is recommended that the chair be allowed to warm up for a minimum of an hour
before using to ensure proper operation and reduce the chances of mechanical breakdown.
Do not use the lift chair if any of the following events occur:
• Water is accidentally spilled on the chair. This may result in electric shock.
• The upholstery is torn and the inside mechanism is exposed.
• You detect any malfunction or another abnormal condition during operation.
Use Caution if there is a power failure. Injury may occur when power is restored unexpectantly if the
operation buttons are depressed. Avoid using the chair during severe lightning storms.
Please switch the power OFF immediately and disconnect the AC power cord from the electrical outlet
in the event of accidental damage or malfunction. Contact a professional for servicing.
