aidacare AC4 BED Single, Руководство пользователя

Страница: 7 / 11

12 13 aidacare.com.au
4.3.2 SIDE RAIL OPERATION
The rails are either fully raised, or folded down closed. When the side rail is
raised to its full height position it will automatically lock in the positioning
hole on the rail clamp plate. The release/lock knob feature can be both
visually and audibly confirmed.
WARNING: Do not operate side rails when there is potential of entrapment
or crushing to the patient, caregivers, visitors and/or other equipment.
Side Rail Operation
To raise the side: Lift the top rail until the locating
pin/knob automatically clicks into its locked
position at maximum height.
To lower the side: Hold the top rail near the foot
end of the bed (1) and gently pull out the red
operating knob (2) lowering the side towards
the foot of the bed whilst controlling the descent
speed. As the side begins to be lowered the
operating knob can be released.
WARNING: Care should be taken whilst operating
the side rails to ensure hands and fingers are kept
away from potential squeeze hazards. Side rails
should only be used after clinical assessment and
within organisational policy and guidelines.
4.3.3 SIDE RAIL SAFETY LOCK INDICATOR
The side rail locating pin has a yellow coating
that allows for visual inspection of the locking
device. When the side rail is in the raised position,
viewing the release knob from the side there
should be no yellow shaft visible. If there is yellow
shaft visible the safety side is NOT securely locked
in the upright position and needs to be adjusted.
The yellow coating should NOT be visible from
above when the safety side is correctly locked
in position.
Side rail release and lock knob shown
in unlocked and locked positions
Unlocked
Locked
WARNING: After adjustment of the side rail visually check the locking
pin location. There should be no yellow shaft on the locking pin visible if
locked correctly. DO NOT use other manufacturer’s side rails on AC4 beds.
4.4 KING SINGLE EXTENDABLE FOOT END MATTRESS RETAINER
AC4 beds come standard with an extendable foot-end mattress-retainer
that is used in conjunction with the bed extension.
To extend the mattress retainer hold vertically and insert ends into 1 of
the 3 receiving keyhole mounts which are 100mm spaced at the foot end
of the mattress platform to match the desired bed extension (nil, 100mm,
200mm). Lower the retainer to the mattress platform. It will now be locked
in place at the mount keyholes.
Retaining Pin
1
2