8
To connect, please make sure the cameras
are on the same switch as the CCU-IP. The
controller comes default with a static IP
address of 192.168.1.108. If you want to change
this, enter the camera menu by pressing
the SETUP button, and look for network
attributes. Here you can adjust the IP, or
change the controller to DHCP mode.
To connect to the camera, please have the
IP addresses of the camera on hand, and
add a network device. From there, plug in
the camera number, Sony VISCA protocol,
and IP address and port (52381 by default)
After confirming, the LCD screen will let
you know if its connected or not.
SECTION: 2
RJ45 Connection:
Содержание CCU-IP
Страница 9: ...9 SECTION 3...
