Aico RadioLINK Ei450 Скачать руководство пользователя страница 16

standby mode without being noticed. Should this happen the Ei450 will continue to flash either the Fire or CO 
icon rapidly for a two minute period. If the system has been activated by a CO alarm the Ei450 will continue to 
flash the CO Icon for a 24 hour period but at a lower rate of 1 flash every 60 seconds. 
Should you observe this condition contact the appropriate authorities immediately.

 

5. Guarantee

Ei Electronics guarantees this Alarm Controller for 5 years from date of purchase against any defects that 
are due to faulty materials or workmanship.
This guarantee only applies to normal conditions of use and service and does not include damage resulting 
from accident, neglect, misuse, unauthorised dismantling, or contamination howsoever caused. This 
guarantee excludes incidental and consequential damage.
This guarantee does not cover costs associated with the removal and/or installation of units.
If the product should become defective within the guarantee period, it may be returned with proof of 
purchase, carefully packaged, and with the problem clearly stated to the place of purchase or phone one 
of these numbers for advice.

UK: 

0870 758 4001         ROI: 

+353 61 471277

We shall at our discretion repair or replace the faulty unit.

16

Содержание RadioLINK Ei450

























Отзывы: