manualshive.com logo in svg

AIC SB212-PH, Руководство пользователя

Поделиться
Скачать
AIC SB212-PH Скачать руководство пользователя страница 57

49

Chapter 4 BIOS Configuration Settings

SB212-PH User's Manual

4�1 Updating BIOS

Important Notes:

To identify the current BIOS version, please check out on BIOS setup.

There are two methods to update the latest BIOS. 
 

1. Update by Messiash Flash utility during POST.

 

2. Update by AMI AFUDOS utility under DOS environment

Update by Messiash Flash utility during POST

1.  Prepare a USB mass storage device.
2.  Put BIOS bin file and mflash.cfg in Root directory.
3.  Plug the USB mass storage device into a USB port of the target computer.
4.  Turn on system.
5.  Boot to BIOS POST screen, you will see hint messages:

Press <S> key to dump system BIOS information.
Press <F> key to update BIOS.
Press <I> key to post system information.
Press <F4> key to open POPUP menu.

6.  Please press <F> key to enter Messiah Flash utility.
7.  Follow the instruction until the message “Update Flash successfully” that had been 

displayed.

8.  Reboot system.

Содержание SB212-PH







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды