6
Chapter 2. Hardware Setup
RSC-1AT User Manual
Extract the power supply unit by pushing the ejector while pulling the power supply
unit.
Pull the module completely out of the chassis.
Install the new power supply unit by pushing it into the chassis. Ensure that the
module is accurately inserted and locked into the chassis.
2�2 Power Supply Unit Module
Unplug the cables and connectors.
Lift the fan module upward. Check to carefully dislodge the rubber connectors from
the attached bracket.
Insert the new fan into the chassis. Verify to align the rubber connectors
with the appropriate slot in the bracket.
2�3 Fan Module
Rubber connectors
