manualshive.com logo in svg

AIC J2024-01, Руководство пользователя, Страница: 68 / 94

Поделиться
Скачать
AIC J2024-01 Скачать руководство пользователя страница 68

Chapter 4 BMC Configuration and Setting 

J2024-01 User's Manual

62

DNS Server Settings 

It lists the options for the DNS interface, Manual and 

available LAN interfaces.

IP Priority 

If the IP Priority is IPv4, it will have 2 IPv4 DNS servers and 1 IPv6 

DNS server. If the IP Priority is IPv6, it will have 2 IPv6 DNS servers and 1 IPv4 

DNS server.

DNS Server 1, 2 & 3

Specify the DNS (Domain Name System) server address to be configured 

for the BMC.

• An IPv4 Address is made of 4 numbers separated by dots as in 

“xxx.xxx.xxx.xxx”.

• Each number ranges from 0 to 255.

• The first number must not be 0.

DNS Server Address will support the following:

• IPv4 Address format.

• IPv6 Address format.

Save

Click ‘Save’ to save any changes made. You will be logged out of 

current UI session and will need to log back in.

Reset

Reset the modified changes.

note : 
This is not applicable for Manual configuration.

Содержание J2024-01































































































Отзывы:

Нет отзывов