Dry cooler Type XP120
5
Asarums Industri AB
Tel:
+46 454 334 00
Södra Industrivägen 2 – 4
Fax:
+46 454 320 295
SE – 374 50 Asarum
Sweden
Installation
The following instructions for installation should be read together with the technical
leaflet.
Location
Place the cooler so that air can pass freely over the entire battery surface and if
possible so that the wind direction does not affect the evacuation air because
re-circulation could otherwise occur. This applies particularly to models
that have low revs.
The cooler is to be mounted on a firm base and secured with foundation bolts.
The cooler frame is provided with pre-drilled holes.
System of designations
XP120
6
A
258
X
Number of loops
A = 960 rpm 3/400 V
B = 705 rpm 3/400 V
C = 460 rpm 3/400 V
D = 345 rpm 3/400 V
B/C= 2-speed 3/400 V
C/D= 2-speed 3/400 V
Size
Dry cooler
Additional
options
