• Rear Panel Controls & Features
8. INPUT Jack Socket
10. FOOT SWITCH Jack Socket
Used for connecting signal
For connecting an external foot
sources like an AUX SEND (Post
switch through a ¼" phone plug.
Fade) of a mixer, the preamp
The foot switch is used to enable
output of a PA mixer, an I / O
or disable the presence of wet
insert of a mixing console and the
(processed) signal at the output of
send / return of a powered
the effects processor. The
speaker.
absence of wet signal is indicated
by MUTE LED on the front panel.
9. OUTPUT Jack Sockets
In mono applications, either of the
11. POWER Socket
LEFT or RIGHT output jack sockets
For connecting the 12V DC power
can be connected to the Aux input
supply adaptor, as supplied
of a PA amplifier, Line input of a
alongwith.
direct coupled amplifier (when used
in mono mode), an I / O insert of a
mixer or the send / return of a
powered speaker.
In stereo applications, for
connecting to AUX RETURN
inputs of a mixing console, the
Line input of a direct coupled
amplifier (when used in stereo
mode) or the Line inputs of a two
zone amplifier.
6
12V dc
footswitch
output
input
right
left (mono)
8
9
10
11
• Interconnections
+
+
+
+
+
+
The effects processor can be used
effects processor before the power
as a table top unit. The unit should
is turned ON.
be situated so that its location or
To avoid signal overloading,
position does not get affected by
distortion and to minimize the noise,
the heat of the amplifier.
it is necessary to set the proper
The effects processor must always
signal levels at every point in the
be powered through a 12V DC
send / return chain.
adaptor, supplied alongwith.
The connection diagrams that
Always insert the adaptor plug into
follow display the typical types of
the 12V DC socket of the unit and
input sources and output
then connect the adaptor to an AC
equipments which can be
mains outlet.
connected to the effects processor.
For correct connections and
When foot switch is to be used,
operation, check the specification of
always connect the foot switch to
the connected equipment.
the bypass jack socket of the
7
Foot Switch
Preamp
Output
MX-15
MX-15
SSA-250M
BTZ-7000
SSA-250M
BTZ-7000
ZONE-A
ZONE-A
Line
Input
Aux
Input
DFX-160B (Rear Panel)
12V DC Adaptor
Mixing Console
P r o S e r i e s
A M X - 1 6 1 2
Aux
Return
(L & R)
Aux Send
(Post Fade)
12V dc
footswitch
output
input
right
left (mono)
PSX-1200
Mic-1 Return
Mic-1 Send
