Ahuja CPA-360 Скачать руководство пользователя страница 4

TROUBLE CHECKS

The following trouble checks will help to correct the most 
common problems encountered with a cassette player.

The  auto  stop  mechanism  activates  and  the  tape 
stops just after it is inserted.

The tape is completely wound on the reel away from 
you (refer instructions in “Cassette Insertion”).

Cassette spools jammed due to deformed cassette 
shell.

Tape moving but no output

The tape volume control is at minimum.

Speakers are not connected.

Hum in Mic and Aux. inputs

Shielding  of  the  pickup  wire  not  proper.  Use  good 
quality shielded cable for input connections.

Try reversing the AC mains plug of the set.

Set gets very hot during operation

Proper ventilation not provided. Keep the set away 
from walls in a well ventilated area.

Speaker  mismatch  causing  overloading.  Check  the 
total speaker impedance and connect to the proper 
tap on the output terminal strip.

Loss of power at  the speakers

Speaker  cables  very  long.  Under  such  conditions, 
make use of the 100V line output connection.

Speaker cables thin. Use thicker type 23/36 cables.

+

+

+

+

+

+

+

+

+

+

MAINTENANCE

To  get  a  long  trouble  free  service,  maintenance  is 
essential. After  some  use    the  Head,  Capstan,  Pinch 
Roller etc. that come in contact with the tape, become 
dirty due to dust or magnetic material on the tape. Dirty 
heads  cause  loss  of  high  frequencies  and  the  output 
falls. Dirty capstan and pinch roller will cause unstable 
tape speed, leading to increased Wow and Flutter.

To clean these, follow the under mentioned procedure:

+

+

+

+

Remove the plastic cover on the top by unscrewing 
the  screws  provided.  The  head  and  pinch  roller 
become accessible through the cutout provided.

Clean  the  head  and  pinch  roller  with  a  cotton  bud 
dipped in methylated spirit.

Keep  magnets  and  metallic  objects  away  from  the 
head. If the head gets magnetized, it will lead to more 
noise and loss of high frequencies. The head and all 
metallic  parts  should  be  got  demagnetized  after 
about 50 hours of use.

Consult your dealer about demagnetizing the head.

• Maintenance & Trouble Checks

TRUSOUND PVT. LTD.    

C-89, Sector IV, Noida, Gautam Budh Nagar-201 301 (UP)

Regd. Office : 125E, Okhla Industrial Estate, New Delhi-110 020

Tel.: +91-120-2551452/53   Fax : +91-120-2553677

E-mail: [email protected], [email protected]  Website: www.ahujaradios.com

1K/02/06

Design and Specifications are subject to change without notice. •           is a registered trademark of Ahuja Radios in India and other countries.

© Copyright Ahuja Radios, 2005. All rights reserved. Any unauthorized reproduction or use of logos, images or design elements is strictly prohibited by law. 

No part of the compilation may be reproduced in any manner or translated without written permission.

Содержание CPA-360

Страница 1: ...t Channels 2 Mic 0 5mV Lo Z 2 5k 1 Aux 50mV 250k Frequency Response 100Hz 12 000Hz 3dB S N Ratio 55dB Tone Control Bass 6dB at 100Hz Treble 10dB at 10kHz This unit is connected to 240V tap when leaving the factory Output Taps for speaker 4 8 16 100V Matching Specifications claimed are subject to permissible production Line Output 250mV 3 5 k tolerances FEATURES Imported Tape Deck Mechanism with Au...

Страница 2: ...fier for obtaining more power output 8 POWER switch 18 AUX Input 9 CASSETTE SLOT For connecting an auxiliary source like a CD player The cassette is loaded into the set through this slot Tuner Echo or Audio Mixer etc 10 FF EJECT Lever For fast winding the tape this lever is pushed in partially For ejecting the cassette it is pushed in fully Total Impedance 32 32 32 32 16 Total Impedance 16 16 16 1...

Страница 3: ...which do not give enough output on TAPE LO position can be played with switch on TAPE HI position and vice versa The tape can be advanced rapidly by pushing in the FF EJECTlever partially To stop the tape push in the FF EJECT lever fully so that the cassette is ejected out Due to theAuto Stop system the cassette is automatically stopped when the tape comes to an end USING THE TONE CONTROLS A TREBL...

Страница 4: ...st or magnetic material on the tape Dirty heads cause loss of high frequencies and the output falls Dirty capstan and pinch roller will cause unstable tape speed leading to increased Wow and Flutter To clean these follow the under mentioned procedure Remove the plastic cover on the top by unscrewing the screws provided The head and pinch roller become accessible through the cutout provided Clean t...

Отзывы: