AHRI RenewAire SA Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 24

background image

1.800.627.4499

2

SA-Series

CORE ARRAY

RISK OF INJURY FROM FALLING OBJECTS

Assembly of this unit requires raising and placing heavy
objects overhead. The possibility exists of an object falling
on workers and severely injuring them. Observe all OSHA-
recommended safety practices and wear appropriate safety
clothing such as protective work gloves and steel-toed
shoes and hard hats.

CAUTION

This equipment is to be installed by following Industry Best

Practices and all applicable codes. Any damage to compo-

nents, assemblies, subassemblies or the cabinet which is

caused by improper installation practices will void the

warranty.

IMPORTANT

RISK OF DAMAGE TO ENERGY RECOVERY MODULE

Do not place ladders against the unit or the stacked enthalpic

cores, either during or after assembly of the module. Do not

place ladders on the unit base during assembly unless the base

is covered with plywood or other material to safely distribute

the load.

CAUTION

RISK OF DAMAGE TO ENERGY RECOVERY MODULE

The Energy Recovery Core Array is designed to be assembled

in its final location.

It is not to be moved after assembly.

CAUTION

Air ducts connecting this Energy Recovery Core Array to the

Occupied Space must be installed in accordance with the

Standards of the National Fire Protection Agency for the instal-

lation of Air-Conditioning and Ventilating Systems (Pamphlet

No. 90A) and Warm-Air Heating and Air-Conditioning Systems

(Pamphlet No. 90B).

IMPORTANT

RISK OF DAMAGE TO ENTHALPIC CORES

Enthalpic cores are made of a fibrous material that is easily

damaged by impacts or contact with other objects. Protect the

core surfaces at all times when working on or near the cores.

IMPORTANT

RISK OF DAMAGE TO ENTHALPIC CORES

Enthalpic cores must be protected from exposure to water

or other liquids at all times. Cores must never be exposed to

solvents or fumes from solvents.

IMPORTANT

The Energy Recovery Core Array must have a complete set of

filters in place at all times, whether the unit is being operated

or not. Even if the unit is not being used, dirt and dust can

migrate into the unit and contaminate the enthalpic cores.

IMPORTANT

This unit is intended for general ventilating and heating only.

Do not use to exhaust hazardous or explosive materials and

vapors. Do not connect this equipment to range hoods, fume

hoods or collection systems for toxics.

IMPORTANT

«
1
2
3
4
...
»

Содержание RenewAire SA Series

























Отзывы:

Нет отзывов

Похожие инструкции для RenewAire SA Series

Бренд: Yo-Yo Desk Страницы: 4

Бренд: ODESD2 Страницы: 25

Бренд: X-CHAIR Страницы: 24

Бренд: Habitat Страницы: 9

Бренд: Enwork Страницы: 14

Бренд: ricoo Страницы: 2

Бренд: Furinno Страницы: 2

LIVE EDGE BE-9014TA

Бренд: Unfinished Furniture of Wilmington Страницы: 5

Writer's 8892929

Бренд: West Elm Страницы: 2

Бренд: Whalen Страницы: 27

Бренд: Hailey Home Страницы: 4

Бренд: VECELO Страницы: 2

Бренд: Möbelix Страницы: 28

Бренд: Zenna Home Страницы: 7

Бренд: Moss Страницы: 6

Бренд: Sable Страницы: 24

Habitat 939/7673

Бренд: Argos Страницы: 7

Бренд: INABOX Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды