ahn myLab VT-01, Инструкция по эксплуатации

Страница: 8 / 12

9. TROUBLESHOOTING
Note: If a er implementa on of the required solu on does not produce normal
vortex ac on, contact service representa ve.
10. WARRANTY STATEMENT
This product is warranted to be free from defects in material and
workmanship for a period of two (2) years from date of purchase. Your
product will be duly repaired upon prompt notification in compliance
with the following conditions :

This warranty is valid only if the product is used for its intended
purpose and within the guidelines specified in this instruction manual.
This warranty does not cover damage caused by accident, neglect,
misuse, improper service, natural forces or other causes not arising
from defects in original material or workmanship. This warranty does
not cover any incidental or consequential damages, commercial loss or
any other damages from the use of this product.
Solu on
Tighten the small
bo om screw
(1/2 or 1
turns max)
Tighten the small
bo om screw
(1 or 2
turns max)
Vortex
Ac on
Par ally
Working
(stops in
between)
Not working
at all.
(completely
stopped)
Con nuously
working
(run without
press)
Problem
Small bo om
screw might
have loosened.
Need to adjust
Small bo om
screw might
have loosened.
Need to ghten
Small bo om
screw might have
ghtened.
Need to loosen.
Loosen the small
bo om screw
(1 or 2
turns max)
Small bo om
screw at the
base of device
pointed by
an arrow.
5