Installation and Wiring Instructions for the Quiet Fan Conceal Range
IMPORTANT: READ THESE INSTRUCTIONS BEFORE COMMENCING THE INSTALLATION
DO NOT install this product in areas where the following may be present or occur:
• Excessive oil or a grease laden atmosphere.
• Corrosive or flammable gases, liquids or vapours.
• Ambient temperatures higher than 40°C or less than –5°C.
• Possible obstructions which would hinder the access or removal of the Fan.
SAFETY AND GUIDANCE NOTES
2
A. All wiring to be in accordance with the current I.E.E. Regulations, or the
appropriate standards of your country and MUST be installed by a suitably
qualified person.
B. The Fan is suitable for installation within Zones 1 & 2.
C. The Fan should be provided with a local isolator switch capable of
disconnecting all poles, having a contact separation of at least 3 mm.
D. Ensure that the mains supply (Voltage, Frequency, and Phase) complies
with the rating label.
E. The Fan should only be used in conjunction with the appropriate products.
F. The Fan should only be used in conjunction with fixed wiring.
G. When the Fan is used to remove air from a room containing a fuelburning
appliance, ensure that the air replacement is adequate for both the fan and
the fuel-burning appliance.
H. The Fan should not be used where it is liable to be subject to direct water
spray for prolonged periods of time.
I. Where ducted Fans are used to handle moisture-laden air, a condensation
arranged to slope slightly downwards away from the Fan.
J. This appliance is not intended for use by persons (includingchildren) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
K. Children should be supervised to ensure that they do not play with
the appliance.
EN
Содержание QF100HTX5CON
Страница 26: ...Produced for Ahlsell www ahlsell com ...
Страница 27: ...26 Notes ...
Страница 28: ...27 Notes ...