Date stamp
You can choose whether you want your DX10 to ‘Date stamp’ any recording.
To switch ‘Date stamp’ on and off, enter the menu, use the up and down buttons to highlight ‘Date stamp’ and select it
by pressing the Video/Playback/OK button. Use the up or down button to choose on or off. Press the
Video/Playback/OK button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
G-Sensor
Your DX10 has a built-in G-Sensor which continual monitors for impact or sudden changes in direction or speed, so it
can sense whether you vehicle has been involved in an incident or accident. If the G-Sensor senses one of these things,
your DX10 will automatically lock and save the preceding length of video recorded so that you will have a permanent
record of the event.
Your unit comes with the G-Sensor set to Medium sensitivity, which we think is the optimum setting but you can
change this if required.
To change the G-Sensor sensitivity, enter the menu, use the up and down buttons to highlight ‘G-Sensor’ and select it
by pressing the Video/Playback/OK button. Use the up or down button to choose between Off, High, Medium or Low.
Press the Video/Playback/OK button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
Emergency/Event recording
You can choose how many Emergency or ‘Event’ recordings the unit saves before the device begins to overwrite them.
You can choose between 20 or 40 events. For example, if you set it at 20, DX10 will save and store up to 20 events.
Once it has reached 20, it will start to overwrite them, starting with the oldest recording first.
To make your selection, enter the menu, use the up and down buttons to highlight ‘Event recording’ and select it by
pressing the Video/Playback/OK button. Use the up or down button to choose between Off, 20 or 40 events. Press the
11.