If you are using the short hose included
with the pressure washer, ensure that the
filter end is fully submerged in to whatever
water source you are using.
Next, pull and hold the orange power
trigger. If you are connected to a normal
hose with the tap ‘open’ the gun will emit
pressurised water almost immediately.
If you are using the short hose and filter
supplied, submerged in something like
a bucket of water, it may take about 20
seconds for the pressurised water to reach
the gun and start to flow.
Release the orange power trigger
whenever you want to stop the water flow.
Using the soap gun
If you have the soap gun attached, carefully aim the pressure washer at the object you want to cover in soap
and pull the trigger. The pressure washer will automatically emit a mixture of soap and water. Use the soap gun
to cover the object you want to wash, such as a bike or vehicle, then clean as normal using a suitable brush or
sponge. Next, remove the soap gun from the main body of the pressure washer, re-attach the wand and rinse
off the soap with clean water.
Release the orange power trigger whenever you want to stop the flow of soap and water.
Charging the battery.
Connect the charger to the battery and insert the charger
in to a standard 240V house socket.
It will take up to 240 mins to fully charge the 2.0AH
battery and up to 480 mins to fully charge the
4.0AH battery from empty, depending on the model
purchased.
Checking the battery level.
Press and hold the button on the front of the battery
to check the level of charge remaining. One red LED
and two green LEDs will be illuminated when the
battery is fully charged.
Connecting the short wand
to the long wand.
For maximum pressure, the short wand should be
connected to the long wand before the combined
sections are attached to the main body of the
pressure washer.
Insert the short wand in to the long wand. Push it
firmly in and rotate clockwise in to place. Check that
the two sections are fully connected before using the
pressure washer.
Connecting the green or red
spray nozzles.
Pull the gold metal collar backwards and insert the
green or red spray nozzle. The green nozzle will
produce an angled spray, whereas the red nozzle will
produce a single, ‘laser’ type spray.
Ensure that the nozzle is pushed all the way in before
releasing the collar and locking the nozzle in place.
Check that the spray nozzle is fully connected before use.
Connecting the wand to the main
body of the pressure washer.
For maximum presure, connect the combined, long and
short wand, in to the main body of the pressure washer.
Push firmly and rotate the wand clockwise in to place.
If you require less pressure, insert only the short wand
and spray nozzle directly in to the main body of the
pressure washer instead.
Check that the wand is fully connected before using the
pressure washer.
Using the soap gun.
Unscrew the top of the soap gun and fill it with a
suitable liquid detergent. Align it with the main body
of the pressure washer, push it firmly in and rotate
clockwise to lock it into place.
Once you have connected the soap gun, follow the
instructions later in this manual, explaining how to
connect the hose and operate the pressure washer.
Always check that the soap gun is fully connected
before use.
Connecting a hose.
Connect the short hose and filter provided or your own
hose pipe to the main body of the pressure washer.
Push the female adaptor firmly on to the male receptor
until you feel it ‘click’ in to place.
Operating the pressure washer.
Once the wand or soap gun, and the hose is fully
assembled the pressure washer is ready to use.
If you have connected the washer to your own hose,
ensure the hose is safely connected to the tap and turn
the water on.
(Please note that the gun will begin to emit water
immediately, so ensure that the gun is not pointing at,
or near anything that you do not wish to get wet)
01
04
02
05
03
06
07
09
Power Clean
Operating instructions
Using the short hose and filter.
If you are using the short hose and filter supplied,
submerge the filter end in to a bucket of water.
If the filter floats back to the top, lightly shake it while it
is still submerged to release any pockets of air that are
trapped in the filter.
Please note that it may take up to 20 seconds for the
water to travel the length of the hose and reach the gun
after you have pulled the trigger.
08
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -
22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00) - 4-6 -