I. Getting Started
A. Safety Instructions
Please follow these guidelines:
A) Vents are provided for heat dissipation at the rear of the
amplifier. Maintain at least a 1” space around these vents to
provide sufficient ventilation. If you decide to rack mount the
amplifier make sure you do not block the vents.
B) Keep all sources of fire, such as lighted candles, away from the
amplifier.
C) This product is approved for use in any climate.
D) Do not expose the product to dripping or splashing. Do not
place objects filled with fluid on the amplifier.
E) Amplifier must be connected to a mains socket outlet with a
protective earthing connection.
F) The appliance coupler (AC cord) is the disconnect device. The
disconnect device shall remain readily operable at all times.
B. Manual Conventions
In this manual, words that appear in
italics
represent actual physical
controls on the AG 500.
C. Basic Setup
Plug in your instrument and the footswitch. Your combo by itself is 8
ohms and 250 watts of power. You can add an 8 ohm extension speaker
and you will have a 500 watt bass rig.
With the
Master
volumes on both channels down, turn on your amplifier.
Adjust each channel as follows:
3.
