https://www.agrotkindustrial.com/
12
Maintenance Instructions
Regular maintenance on attachment is the
key to remain its long working life and safety
work. The maintenance items described
below are more important.
(1) Check all fasteners for looseness and
fasten them.
(2) Check mulcher hydraulic system, to
see whether there is leakage or not, if
there is leakage, replace leaked tube
joints or tubes timely.
(3) Check for components damage on
mulcher, and cracks on solder joints,
repair if necessary.
(4) To refill oil bearing regularly, generally
not more than 40 hours for one time
refill. The positions of refill lubricating
oil are at both ends of the cutting drum
and motor mount. See following
pictures:
A
．
Transmission end:
B .The other side of Transmission
end:
(5) Regularly check belt tension, general
inspection once every 100 hours.
(6) After one time working, clean up debris
and dirt on cutting drum and other parts.
(7) In the maintenance work, be sure to
turn off host machine engine, and hang
up the "maintenance" warning sign on
host machine obvious place to prevent
others close to.
(8) When replacing parts, replace only with
the parts approved by the manufacturer.
C
．
Motor installation
