Installation, Operation & Maintenance Manual CO2-TFT
Rev 3 11-20
1
MERLIN CO2-TFT
Carbon Dioxide & Temperature Monitor
CO
2
measured and displayed in parts per million (PPM).
Temperature can be displayed in degrees Celsius (°C) or Fahrenheit (°F).
0-10V Signal Output progress bar display.
Monitor, record and display average CO
2
concentration over 8 hour periods.
User friendly settings menu.
Pre-alarm and alarm relay output.
Fan controller enabled relay output.
Dual power 100-240VAC or 12-24V.
End of Life notification for CO
2
sensing element.
Automatically switch between ventilation programs when gas is used.
Boost, Mute and Wake Up button.
Installation, Operation & Maintenance Manual
Please read this manual carefully and retain for future use.
The Merlin CO2-TFT is designed to monitor carbon dioxide (CO
2
) in the air and temperature.
The monitor has a digital traffic light style display indicating the carbon dioxide levels and temperature in
the area. When CO
2
gas or temperature reaches alarm state – this device is able to automatically drive
ventilation fans reducing CO
2
and/or temperature.
The information contained within this manual should be referenced for typical installation and operation
only. For specific requirements that may deviate from the information in this guide – contact your supplier.
