Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 34 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
24
1
2
3
4
5
7.8 Nozzles for cleaning main tank interior
Figure 9: RINSING NOZZLE
Nozzles are installed in the main tank and ensure washing the
tank interior after completing spraying. They are connected to
selection valve on the pressure line, through which, when it is
open, they receive required water for cleaning.
7.9 Suction filter
The suction filter is installed between the main tank and the pump. It filters crop protection
liquid before it reaches the regulator. Standard density of filter insert is 50 MESH.
7.9.1 Cleaning of filter insert
First, unscrew the yellow lever (3) on the filter cover (2) by turning it counter clockwise and
pulling it out. The valve mounted inside the filter will close the flow of the liquid from the
main tank. Unscrew the nut (5) from the filter cover and remove the cover and the filter insert
(4). Clean the filter insert and mount all parts back together in the reverse order.
When reassembling, be careful that the metal pin, which is on the extracted part (with yellow
lever) is inserted correctly, otherwise the filter does not function properly.
WARNING: Use protective gloves when cleaning the filter!
Clean the filter insert before each filling of the tank!
Figure 10: SUCTION FILTER